Features:

• HHBP-I Commercial diving bell harness.
• Extremely comfortable to use, with or without the back-mounted bail out cylinder and is tough enough to handle any underwater work requirements.
• High strength nylon webbings are secured to the rubber plate by stainless steel rivets.
• Rubber plate: The heart of the new bell harness is the specially made, ultra tough and flexible BP5 rubber plate. It is made from top grade material with 2 added layers of tear-resistant nylon mesh as reinforcement. There are 2 sets of vertical cut-outs along the centre of the plate for the mounting of bail-out gas supply if necessary (tank straps are available separately).
• Each waist strap comes with 2 x 6mm hook up D-rings, secured to the lower edge and a large 8mm emergency hook up D-ring is riveted to the top of the centre strap, located in between the shoulder straps.
• Comes with Magic Velcro Tape : MV-1/4pcs
• Magic Velcro Tape: Velcro tape helps you to fix the extra webbings.

Description:

This bell harness is set up Bell or Surface-Supply diving with 2 front D-Rings for hook up, plus an upper D-Ring to facilitate emergency lifting of divers. A heavy belt adjuster is provided for using a jock strap if desired.

Specification:

Plate thickness: 8.2mm / 0.32"
Plate reinforcement: Nylon mesh (2 layers)
Plate buoyancy: Negative
Dry weight (rubber plate): 750g / 1.65 lb
Dry weight (complete): 2.4kg / 5.3 lb (size L)
Webbing: 3.5mm thick, 2 inch wide nylon
Rivet: Stainless steel (36)
Hardware: Stainless steel

Size Chart: