Features:
- Supplementary consumables for Apollo
Air Filtration System and
Air Filtration Humidifier.
- Activated Charcoal Filters also filters out trace particles of dust,
rust and odors.
- Apollo's Bio-Filter and A-110 moisture systems will increase tank air
humidity 30-70%.
- Normalizing the humidity level in your air supply will reduce and in
most cases eliminate the negative effects of breathing dry air.
- Keep your filter systems working with this re-fill kit the moisture wick
is constructed of high-density foam.
Description:
The Moisture Wick/Pad is constructed of high-density foam. The dry wick is
dampened by user prior to installation. Once installed the wick surrounds a flow
tube that is the same diameter as the interior of your hose. The tube has small
openings on the sides to create a vacuum when air passes through. Each breath
draws a little moisture from the wick and adds it to the air stream to increase
humidity.
The quickest method to dampen for first use of the day is to drop the Moisture
Wick/Pad into a cup of distilled or plain bottled water. Once wet, it will slide
onto the flow tube and be quickly replenished after each dive without removal
from system.
The Moisture Wick/Pad and tube sit inside a housing that is hand-tight. You add
moisture to the wick after use to ensure optimal humidity level during each
dive. at the end of a day's diving simply slide the wick off and allow it to air
dry completely before storage in travel case.
For scuba diving it is granted that an ample supply air comes first, but no less
crucial is the quality of air. Moisturized air is essential to pulmonary
respiration and comfortable, safer diving. Apollo's moisture system eliminates
the problems associated with dry tank air. It also filters out trace particles
of dust, rust, and odor with the Charcoal Filters. On land our nasal system
filters out many impurities before air enters the body. When air is compressed
into a tank, small amounts become liquefied and settle in the cylinder. Salt,
water, rust, silicon residue, and aluminum oxide can form inside the tank along
with oil and carbon dust. This is due in part to poor compressor maintenance. A
tank's design does not allow these contaminants to be released until the
cylinder is cleaned and serviced. The build-up eventually leaves a residue in
the tank. It is very likely that the air coming from a tank will contain odors
and impurities associated with these types of contaminants. Using the optional
Charcoal Filter will help remove micro-particulates from the air supply.
Select Item:
Item |
Product name |
A |
Mesh Electret
Filter x 1 |
B |
Moisture Wick x
1 |
C |
Mesh Electret
Filter + Moisture Wick / One of Each |
Available Options:
Item: |
| |