Features:

• Anodized aluminum housing.
• To turn the light On/Off: activated by twisting the end cap clockwise or counter-clockwise.
• Brightness: 220 Lumens.
• LED life span: Over 10,000 hours.
• Battery: 3 AA alkaline batteries (included).
• Burn Time: 3.0+ hours.
• Waterproof: 100M.
• Net Weight: 350g +-10g (Including batteries).
• Dimension (approx.): Dia. 5cm x Length 14cm.
• Color Temperature: 6000K.

Description:

Saekodive AL-30LED Neutron mighty light. Package: black carton box.

Carefully Check before each dive:

1. Make sure the batteries have full power.
2. Inspect, clean and thoroughly rinse O-Ring and lubricate with silicone grease.
3. Ensure that the end cap is secured on to the light housing correctly; never over-tighten the cap as doing so may damage the O-Ring. While diving underwater, don't over-tighten the end cap counter-clockwise once the light off as doing so may cause flooding.
4. Turn on the torch and ensure that light is on.
5. Before changing the batteries, make sure the exterior of the torch is clean and dry to avoid failure or damage to the parts inside.
6. Twist the end cap counter-close to open the light housing to change the batteries.
7. Do not mix different brands, different types, or new & old battery cells as this may cause battery deterioration.
8. Only use top quality alkaline batteries.

Post Dive Care:

1. Rinse the torch thoroughly with fresh water and dry it with a towel.
2. Inspect the O-Ring, ensuring they are clean, dry and free from any dust or dirt.
3. Make sure the O-Ring are in good condition and then lubricate with silicone grease.
4. Disconnect and remove the batteries when the light being stored out of use.
5. Store the light in a cool and dry place away from direct sunlight. Never store at a thoroughly temperature above 40¢XC or below -20¢XC.