Features:
- HHBP-I Commercial diving bell harness.
- Extremely comfortable to use, with or without the back-mounted bail out
cylinder and is tough enough to handle any underwater work requirements.
- High strength nylon webbings are secured to the rubber plate by
stainless steel rivets.
- Rubber plate: The heart of the new bell harness is the specially made,
ultra tough and flexible BP5 rubber plate. It is made from top grade
material with 2 added layers of tear-resistant nylon mesh as reinforcement.
There are 2 sets of vertical cut-outs along the centre of the plate for the
mounting of bail-out gas supply if necessary (tank straps are available
separately).
- Each waist strap comes with 2 x 6mm hook up D-rings, secured to the
lower edge and a large 8mm emergency hook up D-ring is riveted to the top of
the centre strap, located in between the shoulder straps.
- Comes with Magic Velcro Tape : MV-1/4pcs
- Magic Velcro Tape: Velcro tape helps you to fix the extra webbings.
Description:
This bell harness is set up Bell or Surface-Supply diving with 2 front
D-Rings for hook up, plus an upper D-Ring to facilitate emergency lifting of
divers. A heavy belt adjuster is provided for using a jock strap if desired.
Specification:
Plate thickness: 8.2mm / 0.32"
Plate reinforcement: Nylon mesh (2 layers)
Plate buoyancy: Negative
Dry weight (rubber plate): 750g / 1.65 lb
Dry weight (complete): 2.4kg / 5.3 lb (size L)
Webbing: 3.5mm thick, 2 inch wide nylon
Rivet: Stainless steel (36)
Hardware: Stainless steel
Size Chart:
Size |
Chest (inch) |
XL |
48" Over |
L |
40" - 48" |
M |
34" - 41" |
S |
30" - 35" |
XS |
- 30" Under |
Available Options: |